NETWORKING
-
Mercury 6 Port (4 Lan +2 Uplink) 100mbps POE Switch₹1,800.00 ₹1,525.42
Complies with IEEE 802.3, IEEE 802.3u, and compatible with IIEEE802.3af standards
Provides 4 PoE ports, with a total power of 43W for the whole machine and a maximum power of 15.4W for a single port
Intelligent cache and intelligent flow control to avoid data packet loss
6 10/100M adaptive RJ45 ports, support automatic port flipping (Auto MDI/MDIX)
All 6 ports support 10M full/half duplex, 100M full/half duplex
UTP ports Support auto-negotiation function, automatically adjust the transmission mode and transmission rate
Support MAC address self-learning
Dynamic LED indicator, providing simple working status prompts and troubleshooting
Built-in power supply, desktop plastic shell structure designWeb Standards
IEEE802.3, IEEE802.3u, IEEE802.3x
Compatible with IEEE802.3af
protocol
CSMA/CD
port
6 10/100M adaptive network ports
Supported network cable types
10Base-T: Category 3 or above UTP
100Base-TX: Category 5 UTP and above
Indicator Lights
Power and status indicator lights
Dimensions (L x W x H)
144mm x 72.5mm x 34mm Exchange method
Store-and-Forward, wire-speed filtering and forwarding
power supply
Built-in power supply
Filtering and forwarding rate
10Mbps: 14880pps
100Mbps: 148800pps
Usage Environment
Working temperature: 0℃ to 40℃
Storage temperature: -40℃ to 70℃
Operating humidity: 10% to 90% RH non-condensing
Storage humidity: 5% to 90% RH non-condensing
-
Mercury 16-Port POE 48V Power supply 100M LAN Ports with Gigabit Uplink Monitoring POE Switch₹8,000.00 ₹6,779.66
- It provides 16 10/100M adaptive RJ45 ports and 2 10/100/1000M adaptive RJ45 ports, of which ports 1-16 are PoE ports and the Gigabit Ethernet port is the uplink port.
- tt provides an ultra-distance mode switch.
- it provides 8 ultra-distance ports, and the ultra-distance port can transmit up to 260m after the ultra-distance mode is turned on.
- It supports IEEE 802.3af/at standards, automatically detects and identifies powered devices (PDs) that comply with the IEEE 802.3af/at standards and supplies power to them.
- The power output power is 128W, and the single-port PoE power can reach 30W;
intelligent power management, if the power of the powered device exceeds the limit, the system starts the PoE port priority mechanism and cuts off the power supply of the port with low priority. - Each port supports MDI/MDIX automatic flipping and auto-negotiation;
it supports IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control. - It can be mounted on a rack.
- Plug and play, no configuration required, simple and convenient.
Web Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
port 16 10/100Mbps RJ45 ports, support PoE function
2 10/100/1000Mbps RJ45 ports, Uplink port
Indicator Lights Each 100M port has a Link/Act indicator
Each Gigabit port has a Link/Act and 1000M indicator light
Each device has 1 Power and PoE Max indicator light
Network media 10BASE-T: Category 3, 4, 5 unshielded twisted pair
100BASE-TX: Category 5 and above unshielded twisted pair
1000BASE-T: Category 5e and above unshielded twisted pair
Mode switch Ultra-distance mode switch: When turned on, ports 9 to 16 work at a rate of 10Mbps, and the maximum transmission distance is 260m
performance Store and Forward
Support 16K MAC address table depth
Usage Environment Working temperature: 0℃～40℃
Storage temperature: -40℃～70℃
Working humidity: 10%~90% RH non-condensing
Storage humidity: 5%~90% RH non-condensing
power supply Built-in power supply, maximum output power 128W
Dimensions (L*W*H) 294mm*180mm*44mm -
Mercury 16 Port 48V POE Power Supply Full Gigabit Monitoring Switch₹11,000.00 ₹9,322.03
- It provides 16 10/100/1000M adaptive RJ45 ports, of which ports 1-14 are PoE ports, and ports 15 and 16 are uplink ports;
- It provides an ultra-distance mode switch and a VLAN isolation mode switch;
- It provides 8 priority ports, and data on the priority ports is transmitted first;
- It provides 6 ultra-distance ports, and the ultra-distance ports can transmit up to 260m after the ultra-distance mode is turned on;
- It supports the IEEE 802.3af/at standard, automatically detects and identifies the powered devices (PD) that comply with the IEEE 802.3af/at standard and supplies power to them.
- The power output power is 128W, and the single-port PoE power can reach 30W;
intelligent power management, if the power of the powered device exceeds the limit, the system starts the PoE port priority mechanism and cuts off the power supply of the port with low priority. - Each port supports MDI/MDIX automatic flipping and auto-negotiation;
- It supports IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control;
- It can be mounted on a rack;
- It is plug-and-play, no configuration required, simple and convenient.
Web Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
port 16 10/100/1000Mbps RJ45 ports, ports 1 to 14 support PoE function
Indicator Lights Each Gigabit port has a dual-color indicator light
Each device has 1 Power and PoE Max indicator light
Network media 10BASE-T: Category 3, 4, 5 unshielded twisted pair
100BASE-TX: Category 5 and above unshielded twisted pair
1000BASE-T: Category 5e and above unshielded twisted pair
Mode switch Ultra-distance mode switch: When turned on, ports 9 to 14 work at a rate of 10Mbps, and the maximum transmission distance is 260m
VLAN isolation switch: After it is turned on, ports 1 to 14 are isolated from each other and can only communicate with the Uplink port
performance Store and Forward
Support 16K MAC address table depth
Usage Environment Working temperature: 0℃～40℃
Storage temperature: -40℃～70℃
Working humidity: 10%~90% RH non-condensing
Storage humidity: 5%~90% RH non-condensing
power supply Built-in power supply, maximum output power 128W
Dimensions (L*W*H) 294mm*180mm*44mm -
Mercury 16 Port 100mbps Desktop Port Switch₹4,200.00 ₹3,559.32
- Compliant with IEEE 802.3 and IEEE 802.3u standards
- 16 10/100M adaptive RJ45 ports
- Support port auto flip (Auto MDI/MDIX) function
- Support MAC address self-learning; Support full-duplex working mode
- Support IEEE802.3x full-duplex flow control and back pressure half-duplex flow control
- Dynamic LED indicator, providing simple working status prompts and troubleshooting
- Built-in universal power supply, desktop design, easy installation, can also be installed in a standard rack
Web Standards
IEEE802.3, IEEE802.3u, IEEE802.3x
protocol
CSMA/CD
port
16 10/100M adaptive network ports
Supported network cable types
10Base-T: Category 3 or above UTP
100Base-TX: Category 5 UTP
Indicator Lights
Power and status indicator lights
Dimensions (L x W x H)
294mm x 180mm x 44mm Exchange method
Store-and-Forward, wire-speed filtering and forwarding
power supply
Built-in universal power supply
Filtering and forwarding rate
10Mbps: 14880pps
100Mbps: 148800pps
Usage Environment
Working temperature: 0℃ to 40℃
Storage temperature: -40℃ to 70℃
Operating humidity: 10% to 90% RH non-condensing
Storage humidity: 5% to 90% RH non-condensing
-
Mercury 16 Channel Gigabit Port Desktop & Monitoring Port Switch₹5,300.00 ₹4,491.53
- Comply with IEEE802.3, IEEE802.3u, IEEE802.3ab protocol standards
- 16 RJ45 interfaces
- 10/100/1000M rate adaptation
- Provides three working modes: standard switching, VLAN isolation, and network cloning
- After turning on the VLAN mode switch, ports 1~14 are isolated from each other and can only communicate with ports 15 and 16
- Support port automatic flipping (Auto MDI/MDIX)
- Support IEEE802.3x full-duplex flow control and back pressure half-duplex flow control
- Dynamic LED indicator, providing simple working status prompts and troubleshooting
- Support MAC address self-learning function
- Desktop steel shell design, exquisite and beautiful, efficient heat dissipation
Web Standards
IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x
protocol
CSMA/CD
port
16 10/100/1000M adaptive network ports
Supported network cable types
10Base-T: Category 3 or above UTP
100Base-TX: Category 5 UTP
1000Base-T: Category 5e and above UTP
Indicator Lights
Power and status indicator lights
Dimensions (L x W x H)
286mm x 112mm x 25mm Exchange method
Store-and-Forward, wire-speed filtering and forwarding
power supply
External power adapter
Filtering and forwarding rate
10Mbps: 14880pps
100Mbps: 148800pps
1000Mbps: 1488000pps
Usage Environment
Working temperature: 0℃ to 40℃
Storage temperature: -40℃ to 70℃
Operating humidity: 10% to 90% RH non-condensing
Storage humidity: 5% to 90% RH non-condensing
-
Tp-Link WIFI7 5000mbps Wireless Network Speed with wired 2.5G (2500mbps) Port Dual Band 2.4Ghz & 5Ghz Wall Access Point₹14,750.00 ₹12,500.00 As low as ₹11,800.00
Hardware specifications
Installation - Directly installed in the national standard 86 network wiring dark box
size - 86*86*55mm
Wireless rate - 2.4GHz: 689Mbps
- 5GHz: 4323Mbps
port - Front bottom: 1 10/100M/1000M RJ45 port
- Back: 1 10/100M/1000/2500M RJ45 port
antenna - Internal antenna
Indicator Lights - 1 system indicator light
Button - 1 FAT/FIT mode toggle switch
- 1 Reset button
- 1 easy-to-expand button
power supply - Standard PoE power supply
Power consumption - PoE power supply maximum power consumption 14.7W
- PoE power supply standby power consumption 4.8W
manage - FIT AP mode: managed by TP-LINK wireless controller (AC)
- FAT AP mode: independent web page management
Usage Environment - Working temperature: 0℃～40℃
- Working humidity: 10%～90%RH non-condensing
- Storage temperature: -40℃～70℃
- Storage humidity: 5%~90%RH non-condensing
Software Specifications (FAT AP Mode)
Wireless Capabilities - SSID broadcast: support
- Number of SSIDs: 8 (2.4G) + 8 (5G) (supports Chinese SSID)
- Network type: guest network, employee network
- Wireless encryption: WPA, WPA2, WPA3, WPA-PSK, WPA2-PSK
- User isolation: isolation between wireless networks and isolation within APs
- Wireless MAC address filtering: support whitelist
- VLAN settings: support SSID and Tag VLAN binding
- Transmit power setting: support 1dBm linear adjustment
- WDS function: support
- Wireless client quantity limit: Supported
- QoS: WMM
- Prohibit weak signal devices from accessing: Support
- Eliminate weak signal devices: Support
- Support automatic RF tuning
- Support smart roaming
System Management - Equipment management: full Chinese WEB management
- System log: support
- Restore factory settings: Support
- Backup configuration: Supported
- Import configuration: Supported
- Software upgrade: support
- Ping watchdog: support
-
Tp-Link AX3000 Gigabit POE Port Dual Band Access point₹11,210.00 ₹9,500.00 As low as ₹10,089.00
AX3000 Dual-Band Gigabit Wi-Fi 6 Wireless Panel AP
- Next-generation Wi-Fi 6 (802.11ax) technology
- 11AX 2.4G/5G dual-band concurrent, wireless rate up to 2976Mbps
- National standard 86 housing, elegant appearance
- 802.3af/at standard PoE cable power supply, no external power supply required
- Supports TP-LINK Easy Extension function. Simply press a button to enable wireless access to TP-LINK Easy Extension devices
- Spectrum navigation guides dual-band users to connect to the 5GHz band first, balancing the load between the 2.4GHz and 5GHz bands to ensure network performance
- FIT mode supports automatic RF tuning
- FIT mode supports smart roaming
- Supports the function of removing weak signal devices and prohibiting weak signal devices from accessing
- Fat and thin in one, different modes can be selected according to different application environments
- Supports centralized management of TP-LINK commercial network cloud platform
- Support TP-LINK Business Cloud APP remote viewing/management
Hardware specifications
Installation - Directly installed in the national standard 86 network wiring dark box
size - 86*86*55mm
Wireless rate - 2.4GHz: 574Mbps
- 5GHz: 2402Mbps
port - Front bottom: 1 10/100M/1000M RJ45 port
- Back: 1 10/100M/1000M RJ45 port
antenna - Internal antenna
Indicator Lights - 1 system indicator light
Button - 1 FAT/FIT mode toggle switch
- 1 Reset button
- 1 easy-to-expand button
power supply - Standard PoE power supply
Power consumption - PoE power supply maximum power consumption 12.5W
- PoE power supply standby power consumption 4W
manage - FIT AP mode: managed by TP-LINK wireless controller (AC)
- FAT AP mode: independent web page management
Usage Environment - Working temperature: 0℃～40℃
- Working humidity: 10%～90%RH non-condensing
- Storage temperature: -40℃～70℃
- Storage humidity: 5%~90%RH non-condensing
Software Specifications (FAT AP Mode)
Wireless Capabilities - SSID broadcast: support
- Number of SSIDs: 8 (2.4G) + 8 (5G) (supports Chinese SSID)
- Network type: guest network, employee network
- Wireless encryption: WPA, WPA2, WPA3, WPA-PSK, WPA2-PSK
- User isolation: isolation between wireless networks and isolation within APs
- Wireless MAC address filtering: support whitelist
- VLAN settings: support SSID and Tag VLAN binding
- Transmit power setting: support 1dBm linear adjustment
- WDS function: support
- Wireless client quantity limit: Supported
- QoS: WMM
- Prohibit weak signal devices from accessing: Support
- Eliminate weak signal devices: Support
- Support automatic RF tuning
- Support smart roaming
Maximum number of associated clients - 127 (2.4G) + 127 (5G)
System Management - Equipment management: full Chinese WEB management
- System log: support
- Restore factory settings: Support
- Backup configuration: Supported
- Import configuration: Supported
- Software upgrade: support
- Ping watchdog: support
-
Tp-Link WIFI6 AX1500 Dual Band Gigabit Port Access Point₹8,850.00 ₹7,500.00 As low as ₹7,965.00
AX1500 Dual-Band Gigabit Wi-Fi 6 Wireless Panel AP
- Next-generation Wi-Fi 6 (802.11ax) technology
- 2.4G/5G dual-band concurrent, wireless rate up to 1500Mbps
- National standard 86 ultra-thin shell, beautiful and elegant
- 802.3af/at standard PoE cable power supply, no external power supply required
- Supports TP-LINK Easy Extension function. Simply press a button to enable wireless access to TP-LINK Easy Extension devices
- Spectrum navigation guides dual-band clients to connect to 5GHz first, making the load of 2.4GHz and 5GHz bands more balanced and ensuring network performance
- FIT mode supports automatic RF tuning
- FIT mode supports smart roaming
- Support weak signal rejection and prohibition of weak signal device access
- Fat and thin in one, different modes can be selected according to different application environments
- Supports centralized management of TP-LINK commercial network cloud platform
- Support TP-LINK Business Cloud APP remote viewing/management
- Machine size (mm): 86*86*33, wall thickness 8mm
Hardware specifications
Installation - Directly installed in the national standard 86 network wiring dark box
size - 86*86*33mm
Wireless rate - 2.4GHz: 300Mbps
- 5GHz: 1201Mbps
port - Front: 1 10/100M/1000M RJ45 port
- Back: 1 10/100M/1000M RJ45 port
antenna - Internal antenna
Indicator Lights - 1 system indicator light
Button - 1 FAT/FIT mode toggle switch
- 1 Reset button
- 1 easy-to-expand button
power supply - Standard PoE power supply
Power consumption - PoE power supply maximum power consumption 9.5W
- PoE power supply standby power consumption 3.45W
manage - FIT AP mode: managed by TP-LINK wireless controller (AC)
- FAT AP mode: independent web page management
Usage Environment - Working temperature: 0℃～40℃
- Working humidity: 10%～90%RH non-condensing
- Storage temperature: -40℃～70℃
- Storage humidity: 5%~90%RH non-condensing
Software Specifications (FAT AP Mode)
Wireless Capabilities - SSID broadcast: support
- Number of SSIDs: 7 (2.4G) + 7 (5G) (supports Chinese SSID)
- Network type: guest network, employee network
- Wireless encryption: WPA, WPA2, WPA-PSK, WPA2-PSK, WPA3
- User isolation: isolation between wireless networks and isolation within APs
- Wireless MAC address filtering: support whitelist
- VLAN settings: support SSID and Tag VLAN binding
- Transmit power setting: support 1dBm linear adjustment
- WDS function: support
- Wireless client quantity limit: Supported
- QoS: WMM
- Prohibit weak signal devices from accessing: Support
- Eliminate weak signal devices: Support
- Support automatic RF tuning
- Support smart roaming
Maximum number of associated clients - 64 (2.4G) + 119 (5G)
System Management - Equipment management: full Chinese WEB management
- System log: support
- Restore factory settings: Support
- Backup configuration: Supported
- Import configuration: Supported
- Software upgrade: support
-
Tp-Link AX3000 WIFI6 Gigabit Port Dual Band Ceiling Access Point₹12,390.00 ₹10,500.00 As low as ₹11,151.00
AX3000 Dual-Band Gigabit Wi-Fi 6 Wireless Ceiling AP
- 11AX (Wi-Fi 6) dual-band concurrent, the maximum wireless rate can reach 2976Mbps
- Supports easy-to-expose MESH networking, sub-nodes without wiring, and coverage of blind spot signals is more convenient
- Wireless transmission power is linearly adjustable, and the signal coverage range can be adjusted according to needs
- Professional dual-band antenna to improve signal quality in the coverage area
- Spectrum navigation guides dual-band clients to connect to the 5GHz band first, making the load of the 2.4GHz and 5GHz bands more balanced and ensuring network performance
- Simple ceiling installation, 802.3at standard PoE network cable power supply
- Port hidden housing, beautiful wiring
- Fat and thin in one, choose different working modes in different environments
- Independent hardware protection circuit, can automatically restore abnormal AP
- FIT mode supports RF automatic tuning function
- FIT mode supports intelligent roaming technology
- Supports centralized management of TP-LINK commercial cloud platform
- Support TP-LINK Business Cloud APP remote viewing/management
product
name - AX3000 Dual-Band Gigabit Wi-Fi 6 Wireless Ceiling AP
Hardware specifications
Bare machine size (length x width x height) - Φ243×64mm (excluding mounting parts)
Packing size (length x width x height) - 306×304×85mm
Bare Metal Weight - 0.56kg (single unit, excluding accessories and packaging)
Total weight - 0.98kg (single unit, including accessories and packaging)
interface - 1 10/100/1000Mbps auto-sensing Ethernet port
- 1 DC power interface
Indicator Lights - 1 system indicator light
Button - 1 RESET button
- 1 easy-to-expand button
- 1 FAT/FIT mode toggle switch
power supply - IEEE 802.3at standard PoE power supply
- DC power supply: 12V
- Note: This product does not include a power adapter. If you need to use DC power supply, please purchase a 12VDC 2A output power adapter and a 5.5mm*2.1mm DC power connector.
Power consumption - PoE power supply maximum power consumption 16.64W
- PoE power supply standby power consumption 5.54W
Operating temperature - 0℃～40℃
Operating humidity - 10%～90%RH non-condensing
Storage temperature - -40℃～70℃
Storage humidity - 5%～90%RH non-condensing
Antenna Type - Built-in omnidirectional antenna
Installation - Ceiling installation
- Wall Mount
Software Specifications
Wireless Capabilities - IEEE 802.11a/n/ac/ax, IEEE 802.11b/g/n/ax wireless protocols
- Maximum wireless rate 2.975Gbps: 0.575Gbps = 2.4GHz band & 2.4Gbps = 5GHz band
- Beamforming
- Maximum Ratio Combining (MRC)
- Space-Time Block Code (STBC)
- Cyclic Delay/Shift Diversity (CDD/CSD)
- LDPC Low Density Parity Check
- Maximum Likelihood Decoding (MLD)
- Wireless speed-up parameters (ShortGI)
- SSID broadcast/hidden
- Number of SSIDs: 2.4G: 7; 5G: 7
- Chinese SSID, including GBK and UTF-8 encoding
- Set up the master network and employee network
- Channel bandwidth settings. 2.4G: 20M/40MHz/Automatic; 5G: 20M/40M/80/160MHz/Automatic
- Dynamic Channel Selection (DCS)
- Wi-Fi Multi-Band
- FIT mode spectrum navigation
- Transmit power setting: Lv1-Lv10, 1dBm step
- Isolation between wireless networks and isolation within APs
- Beacon time slot settings
- Weak signal device removal
- Weak signal devices are prohibited from accessing
- IEEE 802.11k/v/r protocol intelligent roaming
- Automatic RF tuning
- WMM: Priority-based data processing and forwarding
- WDS Function
- Wireless client number limit
- OFDMA
- TWT
Network characteristics - Speed and duplex mode auto-negotiation, automatic MDI/MDI-X
- CAPWAP service interruption maintenance in FIT mode
- AC dual-link backup in FIT mode
- LLDP link discovery
- Divide VLANs based on SSIDs that users access
- Management VLAN
- Obtaining an IP address through DHCP
- Intelligent DHCP Server
- FAT mode DHCPv6, IPv6 address access, radiusv6 authentication and other functions
- FIT mode CAPWAPv6, Wportalv6 authentication, DHCPv6 protection and other functions
Cybersecurity - FIT mode Portal authentication, MAC address authentication
- WPA, WPA2, WPA3, WPA-PSK, WPA2-PSK, WPA3 encryption
- Whitelist management of accessible devices
- SSID and Tag VLAN Binding
- FIT mode broadcast storm suppression
- FIT mode DHCP protection
- FIT Mode ARP Protection
Management - Unified management of wireless controller (AC) in FIT mode
- Independent Web page management in FAT mode
- NMS commercial cloud platform centralized management
- TP-LINK network management system centralized management
System Management - Username/Password Management
- System log viewing/downloading/sending to server
- Manual setting/NTP server synchronization time
- Backup Configuration
- Import Configuration
- Restore factory settings
- Restart your device
- Local online upgrade, local firmware upgrade, cloud upgrade
- Ping watchdog function, abnormal devices automatically recover
- Emergency mode, abnormal devices enter the emergency page to upgrade the firmware
-
Tp-Link AX1500 WIFI6 Gigabit Port Dual Band Ceiling Access Point₹9,558.00 ₹8,100.00 As low as ₹8,602.20
Hardware specifications
Installation - Ceiling/wall installation
size - 180*180*42mm
Wireless rate - 2.4GHz: 300Mbps
- 5GHz: 1201Mbps
port - 1 10/100M/1000M RJ45 port
antenna - Internal antenna
Indicator Lights - 1 system indicator light
Button - 1 FAT/FIT mode toggle switch
- 1 Reset button
- 1 easy-to-expand button
power supply - IEEE 802.3af/at standard PoE power supply
- 12V DC power supply (supports 12VDC 1A/1.5A/2A power supply)
Power consumption - PoE power supply maximum power consumption 10.57W
- PoE power supply standby power consumption 5.05W
manage - FIT AP mode: managed by TP-LINK wireless controller (AC)
- FAT AP mode: independent web page management
Usage Environment - Working temperature: 0℃～40℃
- Working humidity: 10%～90%RH non-condensing
- Storage temperature: -40℃～70℃
- Storage humidity: 5%~90%RH non-condensing
Software Specifications (FAT AP Mode)
Wireless Capabilities - SSID broadcast: support
- Number of SSIDs: 8 (2.4G) + 8 (5G)
- Network type: guest network, employee network
- Wireless encryption: WPA, WPA2, WPA-PSK, WPA2-PSK
- User isolation: isolation between wireless networks and isolation within APs
- Wireless MAC address filtering: support whitelist
- VLAN settings: support SSID and Tag VLAN binding
- Transmit power setting: support 1dBm linear adjustment
- WDS function: support
- Wireless client quantity limit: Supported
- QoS: WMM
- Prohibit weak signal devices from accessing: Support
- Eliminate weak signal devices: Support
- Support automatic RF tuning
- Support smart roaming
Maximum number of associated clients - 128 (2.4G) + 128 (5G)
System Management - Equipment management: full WEB management
- System log: support
- Restore factory settings: Support
- Backup configuration: Supported
- Import configuration: Supported
- Software upgrade: support
- Ping : support